Byrd Tool Shelix cutterhead for Dewalt planer DW735
- Cutterhead diameter is 0. 088″ (roughly 1/16 in) smaller than the original OEM head to allow for installation without removing the carbide insertsC3 carbide cutters lasts an average of 10 times longer per side (4 sides = 40x) than traditional steel knives. Spiraled to break up chips for dust collection, shear to give clean cutting actionTrue helical cut (slices the wood) which greatly reduces noise and tearoutPocket for cutters makes replacing them easy and creates perfect alignment
JET JWP-15BHH 15″ Helical Cutterhead Planer (722155)
- CONTROL AND SUPPORT: Heavy-duty precision-ground cast iron table and four-post design.
- SUPERIOR FINISH: Helical cutterhead houses 48 staggered carbide knives engineered to align themselves without any adjustment.
- EFFICIENCY: Dual infeed speed control for 16 or 20 FPM, maximizes cut efficiency.
- CLEANLINESS: 4″ dust port hooks up to a dust management system, and helps keep your shop clean.
- SAFETY: Magnetic switch with green safety light illuminates when powered.
Shop Fox W1865″ 5 Hp Planer with Helical Cutterhead
- Helical Cutterhead with triple v-belt drive
- 2-Speed chain-driven automatic feed rollers
- Hardened Anti-Kickback fingers
- Precision-ground cast-iron table and extension wings
- Locking table
[ELEPHAS] Woodworking Tool Spiral Cutter head and Helical cutterhead for Dewalt planer Original DW735-OEM
- This cutterhead is the original size. You will need to remove inserts from the cutterhead before installing on the machine. The two bearings 6204+6202 are already installed on the cutterhead.
- Reduced noise and tear-out, produce much smoother finish on difficult woods.
- The patented indexable 4 cutting-edge double-layer insert and screw make it much easier to mount the knives on the cutterhead.
- The indexable inserts allows you to rotate it if one knife edge is dull or nicked.
- Including tool kit: 5 spare inserts/ 10 spare screws/ two T wrenches
JET JWP-208HH 20″ Planer, 5HP, Helical Head (708544)
- SUPERIOR FINISH: Helical cutterhead with 92 indexable carbide inserts.
- ADDED STRENGTH: Heavy-duty cast iron and steel construction.
- CONSISTENT POWER: 5-HP TEFC induction motor with three V-belt transmission.
- ACCURATE TABLE ADJUSTMENTS: Large handwheel with positive gear drive.
- IDEAL FEED RATE: Two-speed gear box with automatic chain tensioner.
Powermatic 201HH 22″ Planer, 7.5HP 1PH 230V (1791267)
- HELICAL CUTTERHEAD WITH 125 FOUR-SIDED CARBIDE INSERTS: Smoother, quieter cutting and finer finish than conventional knives.
- TWO-SPEED GEARBOX: 20/30 fpm; accommodates rough and fine finish work.
- INFEED ROLLER AND CHIP BREAKER: Specially designed to allow multiple boards to be planed at the same.
- DUST CHUTE WITH 5″ PORT: Provides efficient chip and dust collection.
- ROLLER BEARING-MOUNTED FEED ROLLERS: For smooth operation and long life.
JET JJP-12HH 12″ Planer/Jointer with Helical Head (708476)
- SUPERIOR FINISH AND QUIETER CUT: Helical cutterhead with 56 indexable carbide inserts.
- STRENGTH AND DURABILITY: Heavy-duty cast iron and steel construction.
- CONSISTENT POWER: Powerful 3-HP induction motor.
- QUICK AND ACCURATE TABLE ADJUSTMENTS: Large handwheel.
- INCREASED STABILITY: Heavy-duty, one-piece steel closed stand includes mounting tabs.
OSCARBIDE Carbide Inserts Byrd Shelix Replacement Cutters (15x15x2.5mm R100-81°) 15mm Square Carbide Cutters with 4″ Edge Radius for Woodworking Spiral/Helical Planer Cutter Head,10pcs/set
- Carbide Cutters Size:15mmx15mmx2.5mm-R100(81°),4 indexable cutting edge,30* Cutting bevel, polished to a mirror finish for smoother cutting work
- Made of solid tungsten carbide,own longer use life,sharp and durable
- Easy to operate,each blade has 4 sharp edges,if one is dull, just change it to the other side
- Replacement Carbide inserts specially Fits Byrd Journal Helical cutter head
- 10 pieces per box,packed with a plastic container for safe and easy storage
DEWALT Thickness Planer, Two Speed, 13-Inch (DW735)
- Powerful 15-AMP, 20,000 RPM motor (10,000 RPM cutterhead speed) handles larger cuts in wider materials with ease
- Three knife cutter-head delivers 30-percent longer knife life and makes knife change faster and easier
- Two speed gear box allows users to change feed speed to optimizing cuts per inch at 96 or 179 CPI
- Fan-assisted chip ejection vacuums chips off of the cutter-head and exhausts them out of the machine
As an Amazon Associate I earn from qualifying purchases.